Hydrauic power unit for Forklift
This model of hydraulic power unit is especially designed for
Our forklift hydrualic power pack is desinged with a two-way,
two-position solenoid check valve to control the cylinder
Manual control for cylinder operation can be included.
An inbuilt throtting valve is available at the oil return port
which keeps the hydraulic device descending steadily and ata
constant speed. This design also provides our hydraulic power units
with simple operation and convenient maintenance as well as good
pressure maintaning performance.
Rated Pressure: 20Mpa
Rated displacement: 1.6ml/r; 2.0ml/r/ 2.5ml/r, 3.3ml/r
Operating Voltage: 12v, 24v, 48v
Mounting type: Vertical, Horizontal
1.Before installation, please make sure that there are no any
impurities in the oil tank, oil pipe and joints.
The contamination degree of hydraulic oil should not exceed ISO
4406 18/14. The hydraulic oil should be filtered by a 10-30um
filter before put into use. The oil viscostity should be 22-46
mm2/s in accordance with ISO3448 viscosity classification.
2. To achieve thermal equilibrium of the electric motor, we have to
assure that the ratio between interval time and operation time of
the hydraulic power unit is : 1: 9.
3. This small elevator hydraulic power unit is in line with
4. Have an oil change after first 100 working hours of the hyraulic
power pack, and then every 300 working hours.
If you have any hydraulic equipment need, please don't hesitate to
contact us by phone or email. We are ready to serve you.